For several months, we’ve been working hard to bring you the next major firmware release. And today’s the day: firmware 6.0.0 is out now! What does it bring? Honestly, a lot. You can, of course, chew through the complete release notes…
We are happy to announce the stable release of PrusaSlicer 2.7.2. While we work on the next major PrusaSlicer version, we’ve put together this smaller release, featuring many improvements based on the recent feedback.
Download PrusaSlicer 2.7.2
Multi-Material Painting – Enhanced Precision
One of…
Update December 18th, 2023: We are updating the article with the info about two new minor releases of firmware v5.1.2 (complete release notes) and PrusaSlicer 2.7.1 (complete release notes). Please always make sure you are downloading the latest version of our…
It’s time for another update on the Original Prusa XL and there are many exciting things to share. We bumped up our production capacity substantially (and we’ll improve it even more in the upcoming weeks), so we can finally start processing…
PrusaSlicer 2.6 is here and it brings many huge improvements, not only in the overall user experience and by introducing several new tools but also by refining the heart of our software, the G-code generation.
The improvements to the G-code generation often…
The changes in new versions of PrusaSlicer are usually either whole new functions or iterative improvements to the existing tools. But this time, there is at least one fundamental change to how the core slicing works. Such drastic changes take a…
With the holidays around the corner, we prepared an early gift for you – the final version of PrusaSlicer 2.4! With multi-material painting, improved supports, shape gallery… the list of new features is once again nearly endless! Big thanks go to…
Looking back at our blog articles, we’ve noticed one thing: we tend to move further and make more complex projects. These require long testing, thorough planning and usually consume a lot of time. The results are great but we have to…
The final version of PrusaSlicer 2.3 with Paint-on supports, Monotonic infill and Ironing is out! Big thanks to all of you who tested alpha, beta and release candidate versions and shared feedback with us. PrusaSlicer releases bring major changes and improvements…
The top surface of 3D prints is typically not perfectly smooth. As the nozzle draws the perimeters and solid infill, small gaps and ridges remain visible between the toolpath lines. However, if your model has flat areas parallel to the print…
